Luxury Darkglass – Microtubes 500 Combo 210

210 Analog Bass Combo

Redefining Bass with Precision:

– Designed for ultimate sonic quality and portability, the M Combo Series defines excellence in analog bass tones and precision. Featuring custom-made Eminence® speakers and powered by an efficient 500-W class D power module, the M Combo Series are perfect for the musician demanding premium analog character across venues, rehearsals, and home setups.

Top-Panel Features:

– Input: Use this jack to connect your instrument via a standard 1/4″ mono cable

– Headphone Output: Connect your headphones and enjoy the analog cabinet emulation

– Passive/Active: Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).

– Compression: Controls the amount of dynamic compression. The make-up gain is adjusted automatically.

– Drive: Controls the amount of distortion that the Microtubes Engine will deliver. Press to select the drive mode: Off / Vintage Microtubes / Microtubes B3K.

– Blend: Use this knob to mix between the clean signal and the distortion signal

– Level: Controls Microtubes Engine’s output volume.

– Low: ±12 dB @ low shelf

– Low Mids: ±12 dB @ 500 Hz / 1 kHz | Press to select the frequency

– Hi Mids: ±12 dB @ 1.5 kHz / 3 kHz | Press to select the frequency

– Treble: ±12 dB @ high shelf

– Master: Use this knob to control the overall volume of the combo. Press for mute.

Back-Panel Features:

– AC Power On/Off: Power on the combo beast

– AC Socket: Use this connector to feed electric power to the amplifier. 100–230 VAC, 50-60 Hz. Set the voltage selector switch to the correct position before turning on the amplifier!

– Tweeter: Turn the tweeter on/off

– Pre/Post: Select between the unprocessed clean DI and the processed signal

– DI Output: Use this connector to send your signal to the console, mic preamp, interface, etc.

– Ground Lift: Use this control to lift the ground of the XLR output. If you are experiencing ground noise in your DI signal, try changing this control.

– Aux In: Connect this to the headphone output of your laptop, cellphone, MP3 player, etc. The Aux In signal is fed only to the headphone output.

– Return: Use this input to receive the signal from your outboard gear

– Send: Use this output to send the signal to your outboard gear

– Footswitch: Use to connect the Darkglass Super Intelligent Footswitch or MIDI footswitch using a 1/4″ mono instrument cable

– External Speaker: Use this connector to connect the amplifier to an external speaker cabinet. The SpeakON combo jack allows for SpeakON or 1/4″ speaker cable operation. The minimum load impedance is 8 Ohms. The minimum power rating must be 250 W | Warning: Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier.

Technicals details:

– Woofers: Custom-Design Eminence® Speaker

– Horn: Eminence® Tweeter

– Cabinet Material: Balsa Wood

– Power Rating RMS: 500 W

– Dimensions (W x D x H): 46.5 cm x 61.1 cm x 39.5 cm | 18.3″ x 24″ x 15.55″

– Weight: 17.3 kg | 38.13 lb

* Warning: This device can emit extremely loud sounds that might result in temporary or permanent hearing loss. Please proceed with caution when setting and adjusting the volume.